Industrial vacuum cleaner equipment is widely used in industrial production. During long-term use, many people have encountered equipment clogging. Once blocked, they must be cleaned up in time to avoid damage to the machine. The following Aoqun brushes will introduce you to several specific methods for blockage cleaning.

1. Check the position of the float ball, and check whether the float ball is stuck in the air inlet. If the float ball blocks the air inlet, you need to turn off the power of the machine and clean the foreign objects around the float.

Vacuum Cleaner Strip Brushes

2. The seal between the motor and the dust collector is not tight. Check the screws and gaskets around the motor. If the gaskets are loose or damaged, they should be tightened or replaced in time.

3. The fan blades are not fixed and fastened. When the fan blade slides on the motor shaft, it will also affect the dust collection effect. The fan blade positioning screw should be tightened.

4. the strip brush of the brush head of the vacuum cleaner is worn out, causing the suction power to weaken. At this time, remove the strip brush and adjust the position of the strip brush assembly to make the strip brush close to the ground. If the wear is severe, the strip brush accessories of the brush head can be replaced in time. Aoqun Brush Factory specializes in customizing various types of industrial vacuum cleaner head brushes, punching brushes, planting brushes, roller brushes and other styles. The brushes are durable and not easy to shed. If you need a custom vacuum cleaner brush, please contact Aoqun brush manufacturer.